Skip to main content

Mon–Fri 8am–5pm · Sat 10am–2pm

Showroom: 2033 Trade Center Way, Naples, FL

Care and repair · 6 min read

Luxury vinyl (LVP) care and cleaning: what to use, what to skip

Remove grit, damp mop with the right cleaner and protect furniture contact points. Keep your floor's care sheet handy.

The short answer

Remove loose grit first, then damp mop with the pH-neutral cleaner specified for your vinyl, diluted as directed. Wipe spills promptly, skip steam mops unless your care sheet allows them, and pad furniture feet. Luxury vinyl is water-resistant, so standing water or a leak means finding the source. ProFloors & Cabinets in North Naples shows vinyl beside real wood.

Full-size samples at 2033 Trade Center Way, North Naples

See it at the showroomOr call (239) 597-0077

Start with the product’s care sheet so your cleaner, tools and any refresh treatment suit the finish in your home.

Find your floor's care sheet.

Find the brand, collection and product code on an invoice, leftover carton or sample label. Luxury vinyl plank comes in different finishes and maintenance systems, so a COREtec luxury vinyl floor and a Karndean floor can need different care. Choose cleaning supplies from the written product instructions rather than from the floor's wood-look appearance.

Read the care sheet before the first full-room clean. It should guide your choice of cleaner and equipment, the dilution and any rinsing. Check your product's care sheet for any waiting period after installation. Leave a copy beside the supplies so a housekeeper can follow the same routine you use.

Remove grit before mopping.

Sweep gently or use a clean dust mop to pick up loose particles. Focus on entrances, kitchen work areas and the path from the lanai. After a Naples beach visit, start with the sand at the door. Remove it before damp cleaning so the mop does not spread grit through the rooms.

Before vacuuming, check with the vacuum manufacturer that your equipment suits the vinyl floor. Clean entrance mats regularly to limit the dirt they carry indoors. Manufacturers such as Shaw and Karndean caution against latex- or rubber-backed mats because of possible discoloration. Check the backing when choosing a new mat for an exterior door.

Damp mop with the specified cleaner.

Use a manufacturer-approved pH-neutral vinyl cleaner. Both Shaw and Karndean recommend suitable neutral cleaners; match that guidance to your product. Read the bottle as well as the care sheet, especially when changing supplies. Follow the directions for the exact formulation in front of you: concentrates and ready-to-use cleaners have different instructions.

A luxury vinyl plank cut away to show its wear layer, core and click-lock edge
Luxury vinyl plank layers
  1. Start with a clean mop

    After removing loose dirt, use a clean pad or mop suitable for the floor. Change it when dirty so you lift soil away instead of carrying it into the next room.

  2. Measure and work in sections

    Follow the stated dilution and application method. Work with a damp mop, picking up liquid that collects around furniture or at transitions as you move through each section.

  3. Finish according to the label

    Rinse if required and let the area dry before use. If the floor feels sticky or looks streaked, review the cleaner and its dilution before reaching for another product.

Skip steam and harsh treatments.

For routine cleaning, choose a suitable soft mop. Karndean does not recommend steam mops or steam cleaners. For spray mops and powered tools, check the floor's written equipment instructions before use.

Side by side

Use for routine care

Avoid without product approval

  1. Cleaner

    Use for routine care: The specified vinyl cleaner at its stated dilution

    Avoid without product approval: Vinegar mixtures, ammonia cleaners or harsh household chemicals

  2. Cleaning action

    Use for routine care: A suitable soft mop or non-abrasive cloth

    Avoid without product approval: Scouring powders, abrasive pads or aggressive scrubbing

  3. Surface appearance

    Use for routine care: Keep the intended finish clean

    Avoid without product approval: Any coating or restorer the manufacturer does not name

For a scuff, start with the approved spot-cleaning method. If it remains, contact the flooring manufacturer for the next step. Some manufacturers publish refresh treatments for particular floors. Use those only for the named product and follow their directions; leave sanding and wood-floor fillers out of the vinyl cleaning routine.

Clear standing water and find the source.

Luxury vinyl is water-resistant, not waterproof. Blot spills promptly with an absorbent cloth, then clean the spot according to the care sheet. Pick up wet towels and check beneath damp mats. Treat a puddle when you find it rather than leaving it until the next scheduled clean; there is no universal safe soaking time.

For a leaking appliance, recurring wet patch or water intrusion, arrange a professional assessment of the source and affected floor assembly. Mention changing joints or lifting edges; the visible surface may dry while moisture remains below. In a condo, notify property management when adjoining property may be involved and follow association rules. Significant flooding needs a recovery assessment before routine care resumes.

Protect chairs and heavy furniture.

Fit suitable felt protectors to chair and table contact points. Inspect them for wear, separation and trapped grit, and replace dirty or damaged pads. Keep a pad between each furniture foot and the floor during normal use. Include kitchen stools in the check; their repeated small movements deserve the same attention as dining chairs.

Heavy furniture needs load support as well as scratch protection. Shaw recommends wider load-bearing bases for heavier objects. Check the flooring manufacturer's care sheet for suitable protectors or casters. Before moving appliances, plan a protected route and lift or use an approved moving method. Furniture pads alone do not make dragging a heavy object safe.

Bring your care questions to the showroom.

For a seasonal home or rental, leave a clear routine for whoever cleans while you are away. Include the floor name, approved cleaner, spill procedure, furniture precautions and manufacturer's indoor-environment requirements. Before you return, ask your caretaker to report any leaks or changes in the floor, so they are looked at before the usual cleaning.

Bring room photos, the flooring label and labels from current cleaners to the Naples showroom. When choosing a new floor, compare luxury vinyl options with their written maintenance requirements. Review mat backing, furniture protection and cleaning directions with the installer or designer, then choose a routine you can comfortably maintain.

Sources (3)

  1. Shaw Floors: vinyl floor care and maintenance

    Manufacturer guidance supports grit removal, suitable neutral cleaners, furniture protectors and compatible entrance mats.

  2. Karndean Designflooring: cleaning and care

    Karndean describes approved vinyl cleaning, prompt spill care, furniture protection and non-rubber mat backing.

  3. Karndean Designflooring: floor care questions

    The manufacturer's FAQs address vacuum suitability, avoiding steam equipment and protection beneath furniture.

Questions, answered.

Reviewed by Cedric Eckenrode, owner · Updated November 2026

The showroom

  • 2033 Trade Center WayNorth Naples, FL 34109
  • Mon–Fri 8am–5pmSat 10am–2pm
What is the best way to clean luxury vinyl plank flooring?
Remove loose dirt first, then damp mop with a pH-neutral vinyl cleaner approved for your flooring product. Follow the dilution and rinse directions, and let the floor dry before use. Keep the routine simple: a clean soft mop, prompt spill cleanup and furniture pads checked for grit and wear.
Can you use a steam mop on LVP?
Use a suitable soft mop for routine LVP care. Karndean does not recommend steam mops or steam cleaners. Follow your flooring product's instructions for equipment and moisture, and check them before using a powered cleaning tool. Keep the approved method available for anyone who cleans your home.
Can you mop water-resistant luxury vinyl flooring?
Yes, use controlled damp mopping when the product instructions permit it. Remove grit first, use the specified cleaner and avoid leaving excess liquid. Water-resistant flooring still needs prompt spill cleanup. Standing water, leaks or changing joints require attention to the source and floor assembly, beyond cleaning the visible surface.
Do you need furniture pads on luxury vinyl floors?
Yes, suitable furniture protectors help reduce scratches at chair and table contact points. Inspect pads for grit and wear, and replace them when needed. Heavy furniture may require wider load-bearing protection or suitable casters. Follow the flooring manufacturer's recommendations, and plan protection before moving appliances or other heavy objects.
  • One project managerFrom selection through installation
  • No cost to come in and askBring your questions, photos or plans
  • Trade buys here tooYour builder or designer can buy here

Bring your questions to the showroom.

LVP care: clean and protect your luxury vinyl floor.

Request a visit

We call to set a time.

0 / 1907 characters

Tell us about the project; we’ll have the right samples out for your visit.

Add your name and phone to send.

Trouble sending? Call (239) 597-0077

No pressure, no obligation. We’ll only use this to reach out about your project.